Nav noliktavā


RIB boat with a rigid fiberglass hull and an inflatable balloon (PVC density 1050-1100 g/m2), consisting of five sections, which increases the safety and unsinkability of the boat. PVC inflatable boat with rigid fiberglass hull (RIB). It has a spacious flat deck made of moisture resistant plywood (9mm) covered with fiberglass. It is possible to install a sufficiently powerful (up to 90 hp) motor. The boat is equipped with a large deck steering console and aft locker. It is possible to install additional equipment, such as a targa, aft locker, side rails, bow platform, etc. The transom of the boat is made according to a three-layer scheme with moisture-resistant plywood filling over the entire area and has a height L.



Basic equipment:

Boat, wide steering console, stern locker, paddle hook, foot pump, carrying handles (5 pcs.), U-bolt (in the bow), repair kit, (glue, material), instruction manual.



Length (ft./mm) 5220
Beam (in./mm) 2100
Keel at transom (degrees) 12
Middle height (in./mm) 700
Cockpit length (in./mm) 4250
Cockpit width (in./mm) 1100
Dry weight (lbs./kg) 260
Tube diameter (in./mm) 450
Tube PVC density (lbs. per ft. sq/g per m. sq) 0.2254/1100
Number of chambers 5
Transom height (in./mm) 510
Max outboard power (hp) 90
Recommended outboard power (hp) 60-70
Passenger capacity (adults) 8
Payload (lbs./kg) 1000



Papildu informācija

Svars 260 kg


Pašlaik atsauksmju nav.

Uzraksti atsauksmi pirmais par “F-RIB 485RL”

Jūsu e-pasta adrese netiks publicēta. Obligātie lauki ir atzīmēti kā *